河南省防雷协会理事单位，是从事防防雷工程设计施工的乙级资质公司，防雷工程涵盖银行证券、文物古建筑、城市建筑物、煤矿、工业企业等行业的直击雷防护和信息系统防雷系统。避雷针、接地工程面向全国诚招合作伙伴！

C型放热焊接模具

CADWELD放热放接
    艾力高在1938年开发了CADWELD放热焊接工艺，现在CADWELD焊接作为最终的电力连接已经被业界广泛地接受。
可靠性
    由于分子焊接能消除表面接触，电解质等不会渗透到导体交界面上从面导致氧化和并随时间老化
能承受大电流冲击
    由于CADWELD材料的熔化温度要高于铜的熔点（1082℃）。所以，在由于大的故障电流导致的非常温升时，导体本身会先比接头处先熔化。
导电率
    由于CADWELD放热焊接是真正的分子焊接，导体不会被破坏并且没有接触面，导体交界面的整体有效性没有改变。
For through cable connections to the side of ground rods, there has never been a faster or easier way to make a reliable CADWELD® connection. The two-piece GY mold lets you make connections in a trench in about half the time it would take with compression connections or other exothermic connections and at a fraction of the cost.
GY molds are simple to use and provide for easy cable alignment. The molds include a baffle mold cover that reduces emissions and extends handle clamp life.
Features Ergonomic two-piece molds use standard L160 and L159 handle clamps - the same clamps you use with other CADWELD® molds Saves labor costs. A GY connection can be made by one person in about one minute - much faster than other methods Simple to use Easy cable alignment Includes a new baffle mold cover which reduces emissions and extends the handle clamp life Available with wear plates
Applications

More Information